Xerun Stock Spec 1S XR10 80amp ESC And Xerun V10 G2 17.5T Motor combo

Description

Xerun Stock Spec 1S XR10 80amp ESC
The Hobbywing Xerun XR10 Pro 1S Stock Spec 1/12 Sensored Brushless ESC is super small in size and at 31.6x25.8x16.2mm size, is 20% smaller than the standard version XeRun XR10 Pro 1S. Plus, the light weight (only 23.5g w/o wires) provides more weight margin when adjusting the balance of the chassis.
Features:
Special Design for Stock 1S Class Racing:
Reliable hardware combined with powerful software (contains 5 common select-to-use profiles) provides an ideal power solution for 1/12th Stock 1S class racing
Super Internal BEC:
The built-in boost BEC with a maximum output of 6A and voltage adjustable between 6V and 7.4V allows users to use various, servos and receivers (without connecting any extra battery).
Adjustable Throttle & Brake PWM Frequencies:
The independent and adjustable throttle & brake PWM frequencies guarantee precise and accurate throttle and brake control.
Programming/Upgrading/Data Reading Wirelessly:
With Hobbywing's optional "WiFi Express" module (
HWA30503000
- not included) and iPhone or an Android phone (with the HOBBYWING WiFi Link software installed), the user can remotely program parameters, upgrade firmware and check relevant data of the ESC without leaving the control stand.
Built-in Electronic Switch:
The internal electronic switch with a lifespan of over 50,000 on/off cycles completely solves the problems like stuck reed, rust contact points, and automatic shutdown that conventional mechanical switches often have.
Data-logging Capability:
This ESC features the data-logging function which will record the maximum ESC & motor temperatures, the maximum motor RPM, and etc. in real time and allows users to check those data via a LCD program box or WiFi module after each use.
Specifications:
Cont./Peak Current:
80A/380A
Input Voltage:
1S Lipo/3-4 Cell NiMH
BEC Output:
6V/7.4V@3A
Wires:
Black-14AWG-200mm
Connectors:
No
ESC Programing:
not included LCD Program Box or WiFi Module
Firmware Upgrade Supported:
Yes
Size:
31.6x25.8x16.2mm
Weight:
23.5g (w/o Wires)
Applications:
Stock 1S class of 1/10th & 1/12th on-road racing.
KV Rating/T Count:
≥10.5T, 3650-size Motor
Xerun V10 G2 17.5T Motor
Xerun V10 G2 Motors
Specifically designed for extreme running in top 1/10 and 1/12 scale competition racing, the V10 G2 series motors and are compliant with ROAR, IFMAR, BRCA and JMRCA rules. They featuring the perfect combination of high quality materials, exquisite craftsmanship and cutting edge technology, the V10 G2 series provide the extra advantage all professional racers are looking for with minimal maintenance required.
Features:
Designed to withstand extreme levels of use at its highest peak performance
Complete CNC cut motor case with extra front spoke ventilation slots
Works as a sensored motor and also sensorless without the use sensor cable attached
Multiple steps of mechanical time adjustment from 20 to 50 degrees
Minimal maintenance is required with precise machining technology which ensures a minimum tolerance end play of the rotor shaft. Eliminating the copper shims used in most motors.
200°C high temperature tolerance and high purity copper windings maximize conductivity and reliability
200°C high temperature tolerance sintered NdFeb (Neodymium, 35EH-LT) magnets
Extreme low resistance multi-layered outlet PCB and high RPM NSK bearings
Compliant with ROAR, IFMAR, BRCA and JMRCA rules
Certified by RoHS, CE, FCC
Specifications:
Kv:
2300
LiPo Cells:
2S - 3S
Resistance:
0.0457 Ohm
Current w/o Load:
1.3A
Max Output Power:
150W
Current @ Max Output Power:
41A
Can Diameter:
36mm
Can Length:
52.5mm
Shaft Diameter:
3.175mm
Shaft Length:
14.6mm
Weight:
173g
Rotor:
Ø7-12.5
Shipped with USPS First Class.