Tekin RSX Pro Sensored Brushless ESC/Gen4 Motor Combo (6.5T) [TEKTT2802]

Description

The Tekin RSX Pro Sensored Brushless ESC/Gen4 Modified Motor Combo is a premium level racing package. Utilizing the best materials available the GEN4 has been redesigned to cut weight and reduce resistance, resulting in a purebred racing machine. A perfect choice for any discipline, the GEN4 delivers smooth power and control across the full RPM range. The SPEC-R is competition performance with the speed you need to win.
The GEN4 motor line features a redesigned, precision stamped and pressed stator to increase efficiency and reduce resistance. The stators are hand-wound with high purity copper wire and machined from 6061-T6 aluminum. The motors can be tuned with optional rotors and are re-buildable, making the GEN4 motor a premium performance power plant designed for the serious racer.
The Tekin RSX Pro Sensored Brushless ESC is Tekin's premiere modified racing Electronic Speed Control. Using only the best available components and materials, this ESC is performance defined. Bred for 1:10th scale modified competition, the RSX PRO gives you maximum power with precise control and reliability. With a highly efficient aluminum heat sink housing and an entire array of adjustable features, this ESC offers the ability to fine-tune the RSX PRO's massive power for the win.
Included with the RSX PRO is a detachable fan shroud system for maximum cooling in extreme racing conditions. Data Logging, a High Voltage HD Internal BEC and optional 3rd Channel Drag Brake Adjustment come standard as well as access to Team Driver setups. Take your racing program to the next level with the Tekin RSX PRO.
Features:
Motor:
60 Degrees Adjustable Timing Advance
Modified Racing Specific Design
CNC Machined 6061-T6 Billet Aluminum Heat Sink Can
Neodymium Sintered Magnet
Precision Engineered for Maximum Energy Conversion
High Purity Copper Windings Maximize Conductivity
Low Resistance, High Power Solder Tabs
Sensored System Ready
Anodized End-bell Plates Maximize Corrosion and Wear Resistance
High RPM Precision Bearings
Oversized Front Bearing
Rebuild-able Design
Solder-less Sensor PCB Replacement
Legal in Major Race Governing Bodies
ROAR Approved
ESC:
Billet 6061-T6 Aluminum Heat Sink Housing
Redesigned FET Package
HD Easy Solder Posts
Optional Shroud and High RPM Cooling Fan
QuickTune™ One Touch Programming
Adjustable Torque Control (requires HotWire™ sold separately)
Adjustable Throttle and Brake Frequencies (requires HotWire™ sold separately)
HD High Voltage Programmable BEC (requires HotWire™ sold separately)
HotWire™ Programming Port (requires HotWire™ sold separately)
On-the-fly Drag Brake Adjustment
Data Logging Capability (requires HotWire™ sold separately)
Sensor Checker
On-Board Temperature Indicator
ESC Self Diagnostics with Error Codes
Fully Proportional Forward/Brake/Reverse
Brushless and Brushed Motor Drive
Sensored or Sensorless Operation
LiPo Safe with Custom Voltage Cutoffs
Sensor Plug for Precise Commutation
HDAC: High Density Copper PCB's
Ultra-smooth and Precise Throttle and Braking Control
*NOTE:
requires HotWire™ sold separately.
Specifications:
Motor:
Input Voltage:
1-2S LiPO - 9.5T / 8.5T / 7.5T / 6.5T / 5.5T
Weight:
5.1oz / 145g
Shaft Dimensions:
3.18mm (1/8") x 15.3mm
Motor Diameter:
35.85mm / 1.40"
Motor Length:
50.25mm / 1.978"
Max Operating Temperature:
180°F / 82°C
Bearing Dimensions:
Front: 4x13x5mm; Rear: 1/8x3/8x5/32"
Rotor Size:
12.5mm GREEN
Rebuildable:
Yes
ESC:
Controls:
Forward/Brake/Reverse
Input Voltage:
2S-3S LiPo / 4-12S NiMH-NiCD
Motor Limit Brushless Mode:
2S - 2.5T 2-pole 36mm Can / 3S - 10.5T 2-pole 36mm Can / 3500kV
Motor Limit Brushed Mode:
2S - 6 Turn 36mm Can / 3S - 12 Turn 36mm Can
Max Current:
210amps per phase*
HV Adjustable BEC:
6.0v / 7.4v @ 5.5amps
Dimensions:
1.21 x 1.43 x .82" / 31.2 x 37.2 x 21mm
Weight:
1.4oz / 40g
About Us
|
View Store