Castle CM36 5700 motor+Jurassic Power Gallimimus 120A ESC For 1/10 Car Buggy SCT

Description

Description:
●The Gallimimus is a very capable ESC and will satisfy the needs of most player
●Compatible with most of sensorless and sensored brushless motors such as Hobbywing,Castle, LRP, Orion and Tekin, etc
●
Large current endurance
●Supports sensored and sensorless brushless motors, and seamlessly changes to sensorless working mode when the sensor cable is broken.
●Supports 2-3 cells Lipo or 4-9 cells NiMH/NiCd battery pack.
●4 strong capacitors
●Excellent start-up, acceleration and linearity features.
●Large current endurance
●Most effective cooling structure/Powerful fan cooling
●Multiple protection features: Low voltage cut-off protection / Over-heat protection / Throttle signal loss protection
●Easily program with only one button and compatible with pocket-sized program card.
540 size sensorless brushless for cars
The 5700Kv motor is our choice for the best all-around 10th scale buggy and truck motor. From fast on the track, to insane bashing speed runs, the 5700Kv delivers! On 6 cell NiMH or 2s Lipo packs, the 5700Kv motor has been clocked at 40mph in standard 10th scale buggies and trucks with standard gearing. With 3s lipo packs, you can expect 60mph for very large tracks or high speed runs. The 5700Kv motor is roughly equivalent in top speed to a very good 9t or 10t brushed motor on 6 cells.
Feature:
●
For: 1/10 , 1/12 On-road car & Off-road ,1/8, 1/10 Scale Rock Crawler
●
Design: Sensorless-Based
●
Operated with: Brushless ESC
Specification:
ESC
●
Cont. Current: 120A
●
Burst Current: 820A
●
Resistance: 0.0003 ohm
●
Suitable Car: 1/10 , 1/12On-road car & Off-road ,1/8,1/10 Scale rock Crawler
●
Suitable Brushless Motor With 2 cells Lipo or 4-6 cells NiMH: ≧3.5T (on-road), ≧5.5T(off-road)
●
Suitable Brushless Motor With 3 cells Lipo or 7-9 cells NiMH: ≧5.5T (on-road), ≧8.5T(off-road)
●
Battery: 4-9 Cell Ni-xx (NiMh or NiCd) or 2-3 Cell Li-Po
●
BEC Output: 6V@3A
●
Dimension: 43(mm)(L) x 32(mm) (W)x 33(mm)(H)
●
Weight: 108g
Motor
●
Input Voltage:12 NiCad/NiMh MAX 3s LiPo MAX
●
Size:1.4" dia. x 1.7"
●
Weight:(w/wires)7.0 oz (198.4g)
●
Shaft Size:Standard 1/8" (3.2mm)
●
BearingsOversize :ABEC-1 front and rear
●
Connector Type:4mm gold connectors
Include:
Gallimimus 120A ESC (1 Pcs)
Castle motor (1Pcs)
Red Cable Tide (4 Pcs)
Double-sided adhesive（2Pcs）